Solutions for house...

Solutions for hotels...

Solutions for company...

Wodaplug EOC Slave,4*10/100M

Indoor Slave – EOC1121R4L, 600Mbps, 4*LAN, 2*F, WEB Management, max 256 slaves, VLAN, IGMP, QoS …

(new model, chip QCA7411L)

wodaplug eoc slave new2wodaplug eoc slave new

 

This is the data transfer network adapters Ethernet coaxial cables, based on the technology, which offers great HomePlugAV range (700-1500 m), high speed (up to 600 MB/physical speed with speed on the MAC layer of more than 300 MB/s), resistance to interference and during the big decline.

Simply apply the device to the involvement of the building to the Internet after a common coaxial divorce. Allows you to communicate the many units after a single coaxial lead signálovou speeds up to 600Mbps. Site management is done through the Master unit, each slave do not have their IP addresses.

 

EOC (Ethernet over COAX cable) means divorce Ethernet over coax network, on an existing coaxial cable transmission offers the current divorce TV/SAT signal along with the data signal. For the application of the computer network of EOC contains the Head End unit called the Master, which connects the signal to the TV with the data network Ethernet to coaxial mixed signal and an end unit called a Slave, a Master may serve up to 256 of the Slave units, the network structure can be a star or tree. The unit provides data broadcasting EoC master Ethernet over coaxial wiring, it is suitable for a wide range of deployment in the implementation of network applications, which use the existing coaxial wiring, how home installation (in-home) and commercial (offices, apartment houses, hotels, factories). You do not need to install any new cables. This device will allow you to realize the high-speed network for the transmission of video, voice and data.

The structure of the network is the starfish and the tree with one central unit and with several (up to 256) Slave units, which can be isolated from each other (slave izolation).
MThe master unit is connected to a switch or router, and exposes the data to all Slave units. The unit also contains a central NMS/network management system/, which is the old configuration and diagnostics of the whole network and is accessible through the remote management WEB, Telnet, IP, SNMP, CLI …


In the download section you can find the Master + Slave EOC instructions GB description principle and installation, then datasheety to the Master and Slave units and further instructions to the NMS (Web configuration).

The Slave unit to the 4 Ethernet ports for the attached end device. Slave drives are configured and monitored via the NMS in the drive Master.


The slave unit is determined by the EoC for end users and works with the EoC master unit to establish the connection and transmission of Ethernet over coaxial divorce. Of mixed signal again converts the data to the output signal to Ethernet and the TV output TV.

Supported are all the necessary network features such as QoS, VLAN, IGMP, bandwidth management, and more. Appropriate, therefore, to the realization of any network (even for the transmission of voice, video, and IPTV) using existing coaxial cables.


The new hub, are also necessary to connect the coax network integrated in the device, thus has two connectors for coax cable (input and output).

Depending on the installed unit can connect CATV drawers directly between the TV and the receiver port socket. In the event that the attenuation of the radio interference suppression filter in older types of Sockets does not allow such direct deployment is necessary to replace the socket. Replaced by a so-called “. Double socket.

The device is intended for the MDU System (Multi-Entitled) that provides network administrators the ability to control bandwidth. At the same time, this system allows the location of the user more (than it is in the case of Ad-Hoc or Peer-to-peer). In the system, however, must be one powerful control unit with management. The unit is a type of “slave” and in your network needs a “master”. Can handle a maximum of 128 units connect client.

 

Properties

-4 ports of 10/100Base-TX, Auto-Negotiation (10/100 Mbps), IEEE 802.3 u, automatic detection of direct/crossover patch cable, each independent
-2 ports (F) connector (female), 75 Ohm, coaxial connection on the lead and a TV receiver. Port for TV receiver passively linked to supply and is functional even when the device is switched off
-až 128 vzájemně komunikujících jednotek na jediném koaxiálním vedení
-maximální vzdálenost mezi dvěma jednotkami 800-1500m (závisí na struktuře a kvalitě instalace, max platí pro kabel průřezu RG59)

-the current operation with the TV
-Qualcomm’s Atheros chipset family 7411, signal the speed up to 600Mbps, automatic adjustment of speed and modulation, OFDM modulation, adaptive, 896 of load-bearing
-frequency band 7, 5 MHz-65MHz
-the maximum attenuation for cables between the master and slave units: 65dB
-output power: 116dBuV
-the symmetric operation of synchronous duplex Ethernet bridge, transparent, independent of the protocols, operating systems, transparent, does not need any software
-support for 802 .1Q VLAN, IGMP, prioritizing 802.1 p, bandwidth control/shaper-set on the master
-external source, power supply 12V DC


Note that the ability to interconnect LAN ports on the slave devices with VLAN numbers do not need to use a separate router for each user. Just before the front-end router master unit, which can link with the IP address of the VLAN ID (today any Linux distribution, and all the advanced commercial routers). Or just one such router for up to approximately. 4000 LAN ports. If the transmission network provider allows the correct transmission of VLAN ID tag so that the router may not be located in the connecting building and can be placed directly in the headquarters of the CPI and to serve as a large number of users.

Download section (tutorials and documentation) – Click here

Description

Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.

EOC1121R4 series are for NGB next generation broadcast network, especially for Cable TV Operators. It is an advanced end equipment to carry out family bandwidth data access. EOC1121R4 is based on P1901 International Standard Protocol and HomePlug AV Protocol, with low-band and support big line-loss, long transmission distance.

Features

 4*10/100M Ethernet ports, 2*RF ports
 Occupies the Low Frequency Band under 7.5~65MHz. Strong capacity of anti-interference. High bandwidth.
 High-speed up to 700Mbps communications link over existing coaxial cable, @up to 700-1500 meters (depens on cable structure and quality)
 Support SNMP management and MIB standard
 Support VLAN(802.1), QoS(802.1p), IGMP
 Support remote management and auto-upgrade

Specification

Item Specification – Model Number – EOC1121R4
Chipset Intellon INT7410, RTL8198
Protocol HomePlug AV IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3u, IEEE 802.3x,HTTP, SNMP, TELNET
Phisycal Speed 700Mbps
Modulation Bandwidth 7.5 MHz~65 MHz
Modulation Technology OFDM,1024/256/64/16QAM,QPSK,BPSK
Max. Slave number 128
Encryption mode 128-bit AES encrypted
VLAN Support max. 16 VLANs
Limitation of port speed Support minimum 64Kbps granularity
QoS Support VLAN priority
Working mode CSMA/CA
Multicast support Support IGMP manage Multicast diagram
Management mode Support SNMP, WEB, CLI multi-managed mode

Interface Features
Ethernet Interface 4*10/100M Ports
Coax. Cable Interface 1*Female Connector, IP signal output
LED Indication
Ethernet Network connection indicator
Power Power connection indicator
Data Cable connection indicator

RF Performance
Impedance 75Ohm
Transmit Power 0±3dBm
Reflection loss >16dB
Insertion loss <1dB
Receiving sensitivity -65dB

Electrical Characteristics
Power Consumption ≦10W
Power Supply 12VAC

Environment Features
Working Temperature -30℃~60℃
Storage Temperature -40℃~70℃
Working Humidity 10%~90%, non-condensation
Storage Humidity 5%~90%, non-condensation
Environmental standards RoHS

Physical characteristics
Product Size 150*110*30mm
Product Weight N.W.: 0.44kg G.W.: 0.46kg
C/TN Size 470*360*435mm 25pcs/carton
C/TN Weight 11.5kgs

EoC Description

The EoC (Ethernet over COAX)provides Ethernet Access through Coaxial Network, offer Cable TV signal transmission for Operator based on existing Cable network as well as Broadband Data Access. In Network Application, EoC include Head End Equipment called Master and Terminal Equipment called Slave, one Master can support 128 Salvers, network structure can be star type or tree type.

The product of EoC master which can provide the transmission of broadband data service via coax, which is suitable for application in a wide range of both residential (in-home) and commercial (offices, apartments, hotels, warehouses) network applications in which the coax can be utilized. There is never any need to install new wires. These outdoor devices enable the effortless creation of a high-speed network that supports video, voice and data.

The product of EoC slave for end-user that work with EoC master devices to establish Ethernet transmission channels over coaxial cables.

Facebook

Promo Actions

News

  • Nová verze SW pro EOC master

    Je dostupná aktualizovaná verze SW 2.4.0 pro Wodaplug EOC master jednotky. Image pro snadný upgrade přes WEB rozhraní naleznete v sekci download. Novinkou je kompletní management (včetně WiFi a routingu) pro EOC slave s WIFI.

  • Nový model zařízení pro Ethernet přes koax a kompatibilita s 200 a 500C/N

    oblíbený model Wodaplug 200 resp. 500C/N se dočkal vylepšeného nástupce! Dle vašich připomínek jsme připravili nový model vylepšený o IP WEB management, zabezpečení a s pokročilými funkcemi - EoC série! Napište si o vzorky, již dostupné! Zpětná kompatibilita s předchozími modely je díky stejnému čipsetu INT74xx bez problémů možná po přehrání firmware! Přečtěte si návod.

  • Wodaplug3 přichází

    Po dlouholetém úspěchu modelů řady Wodaplug2 přichází nový vylepšený model s novým čipem Qualcom Atheros AR7420 – nejnovější chipset pro větší rychlost, větší dosah a nižší energetickou spotřebu. Podpora IPv6 !! Kompatibilita s předchozími modely standardu HomePlugAV je zachována bez omezení (Wodaplug2 200Mb/s a 500Mb/s).

  • Nový firmware a konfigurační utilita Win7 ready pro adaptér Wodaplug 200C/N s čipem INT6400

    Pro majitele oblíbeného Wodaplug 200C/N s čipem INT6400 jsme připravili konečně novou verzi konfigurační utility AVitar s podporou Windows 7 a nový firmware. Každá verze firmware potřebuje odpovídající verzi konfigurační utility AVitar a odpovídající verzi konfiguračního souboru PIB. Čtěte pozorně pokyny pro upgrade. Ke stažení v sekci DOWNLOAD

Advertising