WDS 1*GE GEPON ONU, ZTE

wodapluglogo

Wodaplug ® WDS111HZ 1*GE EPON ONU, WEB Management, PPOE support, ZTE chip, 1*1000Mbps 

WDS11Hz

 Brief Views

 

EPON ONU WDS111HZ is designed mainly for FTTH ,FTTO application. EPON ONU FD111HZ support 1000Base-PX20+ standard with 1:64 maximum optical splitting ratio and 20km distance, and provide 1uplink GE PON port.

ONU WDS111HZ together with OLT could realize flexible network structure and maintenance and provide total FTTx solutions.

ONU WDS111HZ has 1 PON port , WDS111HZ provide one GE auto-adapting Ethernet port – 1*10/1000 M BASE-T port, Based on famou ZTE chip and PPOE support ! .

Passive Optical Network ( PON , Passive Optical Network ) consists of an optical line termination ( Optical Line Termination , OLT) at the central side of the network to which is attached a branched structure of optical splitters – splitters . These are connected end optical network unit ( Optical Network Unit , ONU ), most often in a tree , or ring or star topologies . The distance between the OLT and ONU can be up to 20 km .

Optical netwok behave transparently as smart switch,  VLAN can be configured for each port of end ONU units. Configuration of ONU is easy thanks to preconfigured templates ( 4 and 8 ports OLT units has template management in base version ! !  ) Newly connected ONU unit automaticly downloads configuration from previosely set template (provisioning). Configuration  OLT unit is possible 1. thru supplied EMS configuration software – central management ) based on SNMP (needs mySQL and reqiure additional SW instalation on master managing PC) or 2. by  telnet and CLI (standard command line interface). Wodaplug units supports SNMP (mibs) protocol.

 

FD111HZ is based on ZTE high-performance xPON access chip. The chip supposes three mode:EPON/EPON/P2P, comply with the EPON standard of g.984, g.983, 802.3-2005, CTC EPON equipment technical requirements, have good xPON interoperability compatibility

FD111HZ provide one GE auto-adapting Ethernet ports. The FD111HZ features high-performance forwarding capabilities to ensure excellent experience with Internet and HD video services. Therefore, the FD111HZ provides a perfect terminal solution and future-oriented service supporting capabilities for FTTH deployment. It has good third-party compatibility to work with the third party OLT, such as Huawei/ZTE/Fiberhome/Alcatel-Lucen.

 Functional Feature

n  Full compatible with IEEE802.3ah

n  Support port-based rate limitation and bandwidth control

n  In compliant with IEEE802.3ah Standard

n  Up to 20KM transmission Distance

n  Support data encryption, group broadcasting, port Vlan separation , etc.

n  Support Dynamic Bandwidth Allocation (DBA)

n  Support ONU auto-discovery/Link detection/remote upgrade of software;

n  Support VLAN division and user separation to avoid broadcast storm;

n  Support power-off alarm function ,easy for link problem detection

n  Support broadcasting storm resistance function

n  Support port isolation between different ports

n  Support three layer routing functions

n  Support ACL and SNMP to configure data packet filter flexibly

n  Specialized design for system breakdown prevention to maintain stable system

n  Support software online upgrading

n  EMS network management based on SNMP ,convenient for maintenance

     Environmental Parameter

=   Environmental Requirement

Operation temperature:-0°C~50°C

Operation humidity:5%—95%

=   Power Specification

Rate voltage/ current:12 V/0.5A

Power:<2W

  Login ONU web

Set computer local IP address manually to 192.168.101.100, using network cable, connect the computer with EPON ONU Ethernet ports, open a browser, copy and paste the URL: http://192.168.101.1

 – for more please read user guide bellow

 http://www.wodaplug.com/download/EPON/ONU/WDS111HZ_1GE_EPON_ONT_UserManual_1.pdf

    Interface

 

Indicator light

Introduction

1

LAN

LAN port status

On: Ethernet connection is normal;

Blinking: Data is being transmitted through the Ethernet port;

Off: Ethernet connection is not set up;

2

LOS

EPON optical signals

On: Optical power lower than receiver

3

PON

ONT Register

On: Success to register to OLT;

Blinking: In process of registering to OLT;

Off: In process of registering to OLT;

4

PWR

Power status

On: The ONT is power on;

Off: The ONT is Power off;

      Application

Facebook

Promo akce

Novinky

  • Wodaplug 11n router NR22Y to get second place in magazin CHIP competition

    Jsme velmi potešeni výborným umístěním našeho nového routeru Wodasign 11n NR22Y. Produkt získal nejvyšší hodnocení za rychlost a za funkční výbavu !! Jsme tedy rádi, že naše vývojářská práce přinese uživatelům mnoho výhod a možností.

  • Reached 100 000 pcs Wodaplug EOC sold milestone !!

    Jsme hrdi, že jsme tento rok dosáhli tohoto magického čísla tak brzy po uvedení této unikátní novinky na trh. Ještě více náš těší obliba u uživatelů a uspokojení potřeb poskytovatelů internetu pro jejich řešení poslední míle.

  • New version of FW for EOC master – v2.4.13b

    New FW for masters units avalible, added complete management include wifi and routing for EOC slave with wifi with better stability at maximum load. / Je dostupná aktualizovaná verze SW 2.4.13 pro Wodaplug EOC master jednotky. Image pro snadný upgrade přes WEB rozhraní naleznete v sekci download. Novinkou jsou kompletní management (včetně WiFi a routingu) pro EOC slave s WIFI a vylepšení stability při maximálním zatížení.

  • New FW for Wodaplug Slave EOC1121R4WL-R s důležitou opravou

    Nový EOC WiFi slave se dočkal nového firmware. Byla odstraněna chyba v bridge modu a optimalizována defaultní konfigurace pro širší použití. Doporučujeme před finální instalací provést upgrade a poté i rest to default. Nový firmware, postup upgrade a nový manuál naleznete v sekci DOWNLOAD.

Reklama